Soap scum and hard water deposits make shower doors look cloudy. While you can remove the film with harsh chemicals, your shower door might be damaged. Bar Keepers Friend Cleanser, which is non-toxic and safe on most surfaces, is a better alternative. Are you ready to learn how to clean a glass shower door? Here are some tips. Read everything about How to Clean Glass Shower Doors below. Choosing the best fire doors for your home is very important in 2023, that’s best for the safety of you and your family same time.
How to clean shower doors
Do a Spot Test
To clean your shower doors, you can use either Bar Keepers Friend Soft Cleanser or Bar Keepers Friend MORE spray & foam. Some people prefer the foam because of its ability to stick to vertical surfaces. These products can be used on almost any non-porous surface. However, before cleaning, you should apply a small amount to the shower door, handles, or fixtures.
Use and scrub
Use Bar Keepers Friend Cleanser to clean your shower doors. Wet the door and then use a sponge or non-scratch scrubpad to apply the cleanser evenly. Let the cleanser’s alkalic acid penetrate the grime for up to one minute. Then, scrub the door with a soft towel and rinse it off. These steps may be repeated to remove stubborn stains and soap scum. You can use the same steps with Bar Keepers Friend Softcleanser, but you won’t need wet your shower door before applying.
Use Bar Keepers Friend MORE Spray & foam to spray evenly on the door. Let the cleaner sit for at least one minute before you scrub the door with a sponge. Then rinse the door and dry it with a soft towel. Make sure to clean your shower doors and track.
Keep the Tracks Clean
The tracks of a sliding shower door need to be cleaned. There may be recessed areas or ridges on the tracks that are difficult to clean with a sponge. For those difficult areas, a toothbrush is a good choice.
Use a little bit of Bar Keepers Friend Cleanser on a toothbrush to clean the tracks. Clean the inside of tracks. To remove any residue, rinse the track with warm water. This step may need to be repeated several times.
Clean the tracks’ outside after you have cleaned the inside. Light-colored grout is not safe for Bar Keepers Friend.
Spray the cleaner on the grout, and then scrub it lightly with a toothbrush. To make a paste from the powdered cleanser add some water to it and use a toothbrush to scrub the grout. To remove any excess cleanser, wipe the grout with a damp rag and then dry it with a soft cloth. This spray & foam is easy to clean and can be used by bar keepers. Make sure grout areas are cleaned with ceramic or porcelain, and not natural stone tiles like marble, granite, or even travertine.
Do not forget the Fixtures
Bar Keepers Friend is safe to use on most alloys: brass, aluminum, copper, bronze (except oil-rubbed bronze), and stainless steel (but not stainless steel appliances, because they have a protective coating). To prevent rust growth, clean any handles or hinges on your shower door. Rinse and dry completely after cleaning.
Please share “How to Clean Glass Shower Doors? – Special Cleaning Guide” with friends and family.